No quality here. As usual lack of care and lack of assembly expertise pretty much ruined this product. There is a large bubble in the plexiglass window right in the middle of View and a scratch about an inch and a half wide running across the plexiglass window that must have been applied before it was assembled because it is down below the raised rim of the frame.
One of the side doors fit well, the other one had almost a 3/4 of an inch Gap towards the top, with a lot of pounding and a lot of bending I was able to get the gap down to something reasonable. Where the hoses come through the grate there were two sharp edges formed by the angles that supports the grate. both of these needed to be ground down and took quite a while. The hoses themselves were about a foot and a half too short and had to be replaced. The nozzle was poorly machined and the air jet did not line up with the inlet of the cone for the blast nozzle and just about had to be completely remade. Good thing I have a machine shop.